- GVM: 750kg
- Axle: Single
- Wheel: 14"
- Braking: Un-braked
- LED Lights
- side gate
- removable grid on the floor
- divider gates
We sell the following brand of trailers : Venter, Burquip, HoldFast & Al-Ko.
Visit us at 7A Milner Street, Strand.
NEW TRAILERS :
-
Dimensions: 2.4 x 1.5 x 1.5 -
Description
1 x 2.4m x 1.5m Single axle trailer without brakes 1.6ton axle, 750kg GVM, 14” wheels. 48mm Jockey wheel in the front. 76mm x 38mm x 5mm Open channel A-frame. 100mm x 50mm x 2mm Lipped channel chassis. 2.0mm Thick lipped channal floor with the wheels on the outside of the trailer. 1.5m Rails, first 300mm closed with plate – rails 50mm square tube. Swing sliding gate combo at the back with rollers at the bottom. Colour: White 2K Duco. 1 x Spare wheel 14” on the A-frame. 12V LED lights. Delivering: To collect or to be arranged but not included. -
- Dimensions: 3.0 x 1.5 x 0.8
- GVM: 750kg
- Axle: Single
- Wheel: 13"
- Braking: Un-braked
-
- Dimensions: 2.4 x 1.5 x 0.8
- GVM: 750kg
- Axle: Single
- Wheel: 14"
- Braking: Un-braked
-
Description
1 x 2.1m x 1.2m Single axle, quad trailer without brakes, 1 x 750kg axle, 750kg GVM 13” wheels. 42mm Jockey wheel in the front. 100mm x 50mm Lipped channel A-frame. 76mm x 38mm x 2mm Rectangle chassis. Thin mesh or 1.6mm plate floor with the wheels on the outside of the trailer. 25mm Square tube on top of chassis. 1 x Set of ramps to fit on the A-frame. Rope tie down points. Colour: White 2K Duco. 1 x Spare wheel 13” under the trailer. 12V LED lights. Delivering: To collect or to be arranged but not included. -
Description
1 x 3.0m x 1.8m Single axle, quad trailer without brakes, 1 x 750kg axle, 750kg GVM 13” wheels. 42mm Jockey wheel in the front. 100mm x 50mm Lipped channel A-frame. 76mm x 38mm x 2mm Rectangle chassis. Thin mesh or 1.6mm plate floor with the wheels on the outside of the trailer. 25mm Square tube on top of chassis. 1 x Set of ramps to fit on the A-frame. Rope tie down points. Colour: White 2K Duco. 1 x Spare wheel 13” under the trailer. 12V LED lights. Delivering: To collect or to be arranged but not included. -
Description
1 x 3.0m x 1.5m Single axle trailer without brakes, 750kg axle, 750kg GVM, 13” wheels. 42mm Jockey wheel in the front. 100mm x 50mm Lipped channel A-frame. 76mm x 38mm x 2mm Rectangle chassis. 50mm Flat bar in the middle. 1.6mm Thick plate floor with the wheels on the outside of the trailer. 0.6m High sides, first 200mm closed with plate – main frame built from 38mm square tube. 0.4m Thin mesh above the plate. Tail gate at the back with 2 x anti loose fasteners. Colour: White 2K Duco. 1 x Spare wheel 13” on the A-frame. Stirling lights. Delivering: To collect or to be arranged but not included. -
Description
1 x 3.0m x 1.5m Single axle trailer without brakes, 750kg axle, 750kg GVM, 13” wheels. 42mm Jockey wheel in the front. 100mm x 50mm Lipped channel A-frame. 76mm x 38mm x 2mm Rectangle chassis. 50mm Flat bar in the middle. 1.6mm Thick plate floor with the wheels on the outside of the trailer. 0.8m High sides, first 200mm closed with plate – main frame built from 38mm square tube. Tail gate at the back with 2 x anti loose fasteners. Colour: White 2K Duco. 1 x Spare wheel 13” on the A-frame. Stirling lights. Delivering: To collect or to be arranged but not included. -
Description
1 x 2.4m x 1.5m Single axle trailer without brakes, 750kg axle, 750kg GVM, 13” wheels. 42mm Jockey wheel in the front. 100mm x 50mm Lipped channel A-frame. 76mm x 38mm x 2mm Rectangle chassis. 50mm Flat bar in the middle. 1.6mm Thick plate floor with the wheels on the outside of the trailer. 0.6m High sides, first 200mm closed with plate – main frame built from 38mm square tube. 0.4m Thin mesh above the plate. Tail gate at the back with 2 x anti loose fasteners. Colour: White 2K Duco. 1 x Spare wheel 13” on the A-frame. Stirling lights. Delivering: To collect or to be arranged but not included. -
Description
1 x 2.4m x 1.5m x .6m Single axle trailer without brakes, 750kg axle, 750kg GVM, 13” wheels. 42mm Jockey wheel in the front. 100mm x 50mm Lipped channel A-frame. 76mm x 38mm x 2mm Rectangle chassis. 50mm Flat bar in the middle. 1.6mm Thick plate floor with the wheels on the outside of the trailer. 0.6m High sides, first 200mm closed with plate – main frame built from 38mm square tube. Tail gate at the back with 2 x anti loose fasteners. Colour: White 2K Duco. 1 x Spare wheel 13” on the A-frame. Stirling lights. -
Description
1 x 2.1m x 1.2m x .06m Single axle trailer without brakes, 750kg axle, 490kg GVM, 13” wheels. 42mm Jockey wheel in the front. 100mm x 50mm Lipped channel A-frame. 76mm x 38mm x 2mm Rectangle chassis. 1.2mm Thick plate floor with the wheels on the outside of the trailer. 0.6m High sides, first 200mm closed with plate – main frame built from 38mm square tube. 50mm Flat bar in the middle. Tail gate at the back with 2 x anti loose fasteners. Colour: White 2K Duco. 1 x Spare wheel 13” on the A-frame. Stirling lights. -
Description
1 x 2.1m x 1.2m Single axle trailer without brakes, 750kg axle, 490kg GVM, 13” wheels. 42mm Jockey wheel in the front. 100mm x 50mm Lipped channel A-frame. 76mm x 38mm x 2mm Rectangle chassis. 1.2mm Thick plate floor with the wheels on the outside of the trailer. 0.6m High sides, first 200mm closed with plate – main frame built from 38mm square tube. 50mm Flat bar in the middle. Tail gate at the back with 2 x anti loose fasteners. Colour: White 2K Duco. 1 x Spare wheel 13” on the A-frame. Stirling lights. Delivering: To collect or to be arranged but not included. -
Vinkie PB - Piggy Back
Description
- 1 x Piggy back, single axel trailer without brakes, 1.5ton axle, 750kg GVM, 13” wheels.
- NO stand in the front.
- Turntable and 2 x ratchets.
- HD Mud guards.
- 3in1 LED lights.
- 1800 Pound hand winch in the front.
- Colour: Yellow 2K Duco.
- 1 x Spare wheel 13”, 5 stud.
-
Vinkie NT - 2 x swing gates
Description
1 x 3.3m x 1.7m Single axle trailer without brakes, 1 x 1.5ton axle, 750 kg GVM, 14” wheels. 48mm Jockey wheel in the front. 2.7Ton BQ Clip-on. 1.6mm Plate floor with the wheels on the outside of the trailer. 1.0m Rails first 200mm closed with plate – main frame from 38mm square tube. 2 x Tail gates at the back with cattle pins. Colour: White 2K Duco. 1 x Spare wheel 14” on the A-frame. 12V LED lights. -
Dimensions: 3.0 x 1.5 x 1.0- GVM: 750kg
- Axle: Single
- Wheel: 14"
- Braking: Un-braked
-
Description
1 x 2.4m x 1.5m Single axle trailer without brakes 1.6ton axle, 750kg GVM, 14” wheels. 48mm Jockey wheel in the front. 2.0mm Thick lipped channel or plate floor with the wheels on the outside of the trailer. 0.8m High sides, first 300mm closed with plate – rails 50mm square tube. Tail gate with 2 x cattle pins and flap at the back. Colour: White, Black, Green OR Brown 2K Duco. 1 x Spare wheel 14” on the A-frame. LED Lights. Delivering: To collect or to be arranged but not included. -
Description
1 x 3.0m x 1.5m Single axle, brake neck, golf car trailer without brakes, 1 x 750kg axle, 750kg GVM, 13” wheels. 48mm Jockey wheel. 76mm x 38mm x 5mm Open channel A-frame. 76mm x 38mm x 2mm Rectangle chassis. Thick mesh or 1.6mm plate floor with the wheels on the outside of the trailer. Rope tie downs. Colour: White 2K Duco. 1 x Spare wheel 13” under the trailer. Chevron board and ramp at the back. 12V LED lights. Delivering: To collect or to be arranged but not included. -
Description
1 x 2.4m x 1.5m Single axle, three bike trailer, without brakes, 1 x 750kg axle, 750kg GVM, 13” wheels. 48mm Jockey wheel in the front. 76mm x 38mm x 5mm Open channel A-frame. 76mm x 38mm x 2mm Rectangle chassis. Thick mesh or 1.6mm thick plate floor with the wheels on the outside of the trailer. 3 x Bike guides to be bolted. 200mm High in the front closed with plate. 2 x Stands at the back. Colour: White 2K duco. 1 x Ramp to fit on the A-frame of the trailer. 1 x Spare wheel 13” under the trailer. 12V LED lights. Delivering: To collect or to be arranged but not included. -
Description
1 x 2.4m x 1.2m Single axle, single bike trailer, without brakes, 1 x 750kg axle, 750kg GVM, 13” wheels. 48mm Jockey wheel in the front. 76mm x 38mm x 5mm Open channel A-frame. 76mm x 38mm x 2mm Rectangle chassis. Thick mesh or 1.6mm thick plate floor with the wheels on the outside of the trailer. 1 x Bike guide to be bolted. 200mm High in the front closed with plate. 2 x Stands at the back. Colour: White 2K duco. 1 x Ramp to fit on the A-frame of the trailer. 1 x Spare wheel 13” under the trailer. 12V LED lights. Delivering: To collect or to be arranged but not included. -
Wheelchair trailer This unique trailer serves a special need providing transport for a motorised wheelchair. The drive-on facility provided by a gas lift assisted tipping action is convenient and reliable. Being able to transport the wheelchair to distant locations is a great benefit. Features • Perfectly balanced, with articulated tipping of the trailer to provide access for driving wheel chair on. • Gas lift assisted tipping action • Lugs on sides to secure whee;chair in transit. • Wheelchair can be loaded from the rear ,by way of a tipped ramp • Tread-hole punched floor. • Fitted with a lockable coupler.(lock optional) • Equipped with a handbrake chain. • Tailights are protected. • Fitted with a Rubax axle • Including spare wheel 165x13 inch • Spare wheel bracket mounted on A-frame • Large padlockable storage box on the A-frame Trailer in use Here are some images of the trailer being loadedcs
Dimensions B Height (over all) 640 mm A Height (side) 200 mm C Length (body) 1970 mm D Length (over all) 3190 mm E Width (inside) 1310 mm F Width (over all) 1800 mm G Ground Clearance 220 mm Technical Info Tare Mass 200 kg GVM 700 kg Pay Load 500 kg Brakes No brakes Axle Length 1610 mm Axle Capacity 750 kg Leaf Springs Rubber suspension Wheels 165 x 13 inch -
Dimensions A Height (over all) 1380 mm B Height (side) 860 mm C Length (body) 1195 mm D Length (over all) 2315 mm F Width (over all) 1380 mm G Ground Clearance 250 mm Technical Info Tare Mass 180 kg GVM 700 kg Pay Load 520 kg Brakes No Brakes Axle Length 1260 mm Axle Capacity 750 kg Leaf Springs 8 Blade Wheels 165 x 13 inch -
1. Perfectly balanced, yet light weight and durable. 2. UV-treated polyethylene tank makes it the perfect liquid carrier. 3. Tank has a 250mm inlet and a 50mm outlet. 4. Taillights are protected. 5. Tank capacity: 500 and 1000 litres. 6. 1000 litre water cart has run - in brake system for maximum safety. 7. Including spare wheel 195x14 in
-
Voyager 14" 7 ft with steel roofrack Voyager is a new series of leisure trailer that sports economy and maximim space utilisation. The trailer sports a deeper body than standard trailers, allowing for storage of typical camping equipment inside. Access to the interior is very easy with a rear tailgate and a gas-assisted top lid. Added stability when parked, comes from two extension legs, that neatly tuck away. It features superb space utilisation getting more into less. This trailer has the following: Features • A deep body of over 500 mm for those larger items • Body constructed of zinc galvanised sheet steel • A large nosecone with gas lift-assisted lid for additional storage • 14 inch wheels for rough terrain, plus spare wheel • Two extension legs providing stability on uneven ground • A robust steel roofrack for carrying loads • A wide rear tailgate for access to the trailer interior • A gas lift assisted flip-up trailer lid allowing for easy access to the trailer interior • 6 inch adjustable jockey wheel • 36 inch 6 blade leaf springs • 8 ring holders for securing luggage inside • Very sturdy coupler • Strong construction using 30% more steel than standard trailers • A long life 1250kg axle • Numberplate twin light fitting • Aluminium handles • New multi-function LED light • New numberplate holder Nosecone SizesDimensions A Height (over all) 1350 mm B Height (side) 820 mm C Length (body) 2105 mm D Length (over all) 3055 mm E Width (inside) 1135 mm F Width (over all) 1575 mm G Ground Clearance 300 mm to bottom of axle I Length (nose-cone) 650 mm H Height (body) 640 mm Technical Info Tare Mass 280 kg GVM 750 kg Pay Load 470 kg Axle Length 1400 mm Axle Capacity 1250 kg Leaf Springs 8 Blade 36 inch Wheels 195 x 14 inch Doors Door (rear - height) 500 mm Door (rear - width) 620 mm (J) -
Voyager 14" 7 ft with cycle rack Voyager is a new series of leisure trailer that sports economy and maximim space utilisation. The trailer sports a deeper body than standard trailers, allowing for storage of typical camping equipment inside. Access to the interior is very easy with a rear tailgate and a gas-assisted top lid. Added stability when parked, comes from two extension legs, that neatly tuck away. It features superb space utilisation getting more into less. This trailer has the following: Features • A deep body of over 500 mm for those larger items • Body constructed of zinc galvanised sheet steel • A large nosecone for additional storage • 14 inch wheels for rough terrain, plus spare wheel • Two extension legs providing stability on uneven ground • A robust cycle rack for carrying four bicycles • A wide rear tailgate for access to the trailer interior • A gas lift assisted flip-up trailer lid allowing for easy access to the trailer interior • 6 inch adjustable jockey wheel • 36 inch 6 blade leaf springs • 8 ring holders for securing luggage inside • Very sturdy coupler • Strong construction using 30% more steel than standard trailers • A long life 1250kg axle • Numberplate twin light fitting • Aluminium handles • New multi-function LED light • New numberplate holder Nosecone SizesLink to NEW cycle rack 29 inchDimensions A Height (over all) 1255 mm B Height (side) 640 mm C Length (body) 2105 mm D Length (over all) 3055 mm E Width (inside) 1135 mm F Width (over all) 1575 mm G Ground Clearance 300 mm to bottom of axle I Length (nose-cone) 650 mm Technical Info Tare Mass 280 kg GVM 750 kg Pay Load 470 kg Axle Length 1400 mm Axle Capacity 1250 kg Leaf Springs 8 Blade 36 inch Wheels 195 x 14 inch Doors Door (rear - height) 500 mm Door (rear - width) 620 mm (J) -
Voyager is a new series of leisure trailer that sports economy and maximim space utilisation. The trailer sports a deeper body than standard trailers, allowing for storage of typical camping equipment inside. Access to the interior is very easy with a rear tailgate and a gas-assisted top lid. Added stability when parked, comes from two extension legs, that neatly tuck away. It features superb space utilisation getting more into less. This trailer has the following: Features • A deep body of over 500 mm for those larger items • Body constructed of zinc galvanised sheet steel • A large nosecone for additional storage • 14 inch wheels for rough terrain, plus spare wheel • Two extension legs providing stability on uneven ground • A robust aluminium roof rack provides for carrying large items externally • A wide rear tailgate for access to the trailer interior • A gas lift assisted flip-up trailer lid allowing for easy access to the trailer interior • 6 inch adjustable jockey wheel • 36 inch 8 blade leaf springs • 8 ring holders for securing luggage inside • Very sturdy coupler • Strong construction using 30% more steel than standard trailers • A long life 1250kg axle • Numberplate twin light fitting • Aluminium handles • New multi-function LED light • New numberplate holderDimensions A Height (over all) 1250 mm B Height (side) 640 mm C Length (body) 2105 mm D Length (over all) 3055 mm E Width (inside) 1135 mm F Width (over all) 1575 mm G Ground Clearance 300 mm to bottom of axle I Length (nose-cone) 650 mm Technical Info Tare Mass 280 kg GVM 750 kg Pay Load 470 kg Axle Length 1400 mm Axle Capacity 1250 kg Leaf Springs 8 blade 36 inch Wheels 195 x 14 inch Doors Door (rear - height) 500 mm Door (rear - width) 620 mm (J) -
Voyager is a new series of leisure trailer that sports economy and maximim space utilisation. The trailer sports a deeper body than standard trailers, allowing for storage of typical camping equipment inside. Access to the interior is very easy with a rear tailgate and a gas-assisted top lid. Added stability when parked, comes from two extension legs, that neatly tuck away. It features superb space utilisation getting more into less. This trailer has the following: Features • A deep body of over 500 mm for those larger items • Body constructed of zinc galvanised sheet steel • A large nosecone for additional storage • 14 inch wheels for rough terrain, plus spare wheel • Two extension legs providing stability on uneven ground • A bigger 5-way aluminium roof rack provides for carrying large items externally • A wide rear tailgate for access to the trailer interior • A gas lift assisted flip-up trailer lid allowing for easy access to the trailer interior • 6 inch adjustable jockey wheel • 36 inch 8 blade leaf springs • 8 ring holders for securing luggage inside • Very sturdy coupler • Strong construction using 30% more steel than standard trailers • A long life 1250kg axle • Numberplate twin light fitting • Aluminium handles • New multi-function LED light • New numberplate holderDimensions A Height (over all) 1250 mm B Height (side) 640 mm C Length (body) 2105 mm D Length (over all) 3055 mm E Width (inside) 1135 mm F Width (over all) 1575 mm G Ground Clearance 300 mm to bottom of axle I Length (nose-cone) 650 mm Technical Info Tare Mass 280 kg GVM 750 kg Pay Load 470 kg Axle Length 1400 mm Axle Capacity 1250 kg Leaf Springs 8 blade 36 inch Wheels 195 x 14 inch Doors Door (rear - height) 500 mm Door (rear - width) 620 mm -
Voyager 14 inch 6 ft with steel roofrack Voyager is a new series of leisure trailer that sports economy and maximim space utilisation. The trailer sports a deeper body than standard trailers, allowing for storage of typical camping equipment inside. Access to the interior is very easy with a rear tailgate and a gas-assisted top lid. Added stability when parked, comes from two extension legs, that neatly tuck away. It features superb space utilisation getting more into less. This trailer has the following: Features • A deep body of over 500 mm for those larger items • Body constructed of zinc galvanised sheet steel • A large nosecone for additional storage • 14 inch wheels for rough terrain, plus spare wheel • Two extension legs providing stability on uneven ground • A robust steel roofrack for carrying loads • A wide rear tailgate for access to the trailer interior • A gas lift assisted flip-up trailer lid allowing for easy access to the trailer interior • 6 inch adjustable jockey wheel • 36 inch 6 blade leaf springs • 8 ring holders for securing luggage inside • Very sturdy coupler • Strong construction using 30% more steel than standard trailers • A long life 1250kg axle • Numberplate twin light fitting • Aluminium handles • New multi-function LED light • New numberplate holderDimensions A Height (over all) 1350 mm B Height (side) 820 mm C Length (body) 1805 mm D Length (over all) 2750 mm E Width (inside) 1135 mm F Width (over all) 1575 mm G Ground Clearance 300 mm to bottom of axle I Length (nose-cone) 650 mm H Height (body) 640 mm Technical Info Tare Mass 280 kg GVM 750 kg Pay Load 470 kg Axle Length 1400 mm Axle Capacity 1250 kg Leaf Springs 8 Blade 36 inch Wheels 195 x 14 inch Doors Door (rear - height) 500 mm Door (rear - width) 620 mm (J) -
Voyager 14" 6 ft with cycle rack Voyager is a new series of leisure trailer that sports economy and maximim space utilisation. The trailer sports a deeper body than standard trailers, allowing for storage of typical camping equipment inside. Access to the interior is very easy with a rear tailgate and a gas-assisted top lid. Added stability when parked, comes from two extension legs, that neatly tuck away. It features superb space utilisation getting more into less. This trailer has the following: Features • A deep body of over 500 mm for those larger items • Body constructed of zinc galvanised sheet steel • A large nosecone for additional storage • 14 inch wheels for rough terrain, plus spare wheel • Two extension legs providing stability on uneven ground • A robust cycle rack for carrying four bicycles • A wide rear tailgate for access to the trailer interior • A gas lift assisted flip-up trailer lid allowing for easy access to the trailer interior • 6 inch adjustable jockey wheel • 36 inch 6 blade leaf springs • 8 ring holders for securing luggage inside • Very sturdy coupler • Strong construction using 30% more steel than standard trailers • A long life 1250kg axle • Numberplate twin light fitting • Aluminium handles • New multi-function LED light • New numberplate holderDimensions A Height (over all) 1255 mm B Height (side) 640 mm C Length (body) 1805 mm D Length (over all) 2750 mm E Width (inside) 1135 mm F Width (over all) 1575 mm G Ground Clearance 300 mm to bottom of axle I Length (nose-cone) 650 mm Technical Info Tare Mass 280 kg GVM 750 kg Pay Load 470 kg Axle Length 1400 mm Axle Capacity 1250 kg Leaf Springs 8 Blade 36 inch Wheels 195 x 14 inch Doors Door (rear - height) 500 mm Door (rear - width) 620 mm (J) -
Voyager is a new series of leisure trailer that sports economy and maximim space utilisation. The trailer sports a deeper body than standard trailers, allowing for storage of typical camping equipment inside. Access to the interior is very easy with a rear tailgate and a gas-assisted top lid. Added stability when parked, comes from two extension legs, that neatly tuck away. It features superb space utilisation getting more into less. This trailer has the following: Features • A deep body of over 500 mm for those larger items • Body constructed of zinc galvanised sheet steel • A large nosecone for additional storage • 14 inch wheels for rough terrain, plus spare wheel • Two extension legs providing stability on uneven ground • A robust aluminium roof rack provides for carrying large items externally • A wide rear tailgate for access to the trailer interior • A gas lift assisted flip-up trailer lid allowing for easy access to the trailer interior • 6 inch adjustable jockey wheel • 36 inch 8 blade leaf springs • 8 ring holders for securing luggage inside • Very sturdy coupler • Strong construction using 30% more steel than standard trailers • A long life 1250kg axle • Numberplate twin light fitting • Aluminium handles • New multi-function LED light • New numberplate holderDimensions A Height (over all) 1250 mm B Height (side) 640 mm C Length (body) 1805 mm D Length (over all) 2750 mm E Width (inside) 1135 mm F Width (over all) 1575 mm G Ground Clearance 300 mm to bottom of axle I Length (nose-cone) 650 mm Technical Info Tare Mass 280 kg GVM 750 kg Pay Load 470 kg Axle Length 1400 mm Axle Capacity 1250 kg Leaf Springs 8 blade 36 inch Wheels 195 x 14 inch Doors Door (rear - height) 500 mm Door (rear - width) 620 mm -
Venter Voyager 14 inch 7 ft for sale from Helderberg Trailer Sales - suppliers of trailers and spares.Voyager is a new series of leisure trailer that sports economy and maximum space utilisation. The trailer sports a deeper body than standard trailers, allowing for storage of typical camping equipment inside. Access to the interior is very easy with a rear tailgate and a gas-assisted top lid. Added stability when parked, comes from two extension legs, that neatly tuck away. It features superb space utilisation getting more into less. This trailer has the following: Features A deep body of over 500 mm for those larger items Body constructed of zinc galvanised sheet steel A large nosecone for additional storage 14 inch wheels for rough terrain, plus spare wheel Two extension legs providing stability on uneven ground A wide rear tailgate for access to the trailer interior A gas lift assisted flip-up trailer lid allowing for easy access to the trailer interior 6 inch adjustable jockey wheel 36 inch 8 blade leaf springs 8 ring holders for securing luggage inside Very sturdy coupler Strong construction using 30% more steel than standard trailers A long life 1250kg axle Numberplate twin light fitting Aluminium handles New multi-function LED light New numberplate holder Nosecone Sizes 
Dimensions A Height (over all) 1150 mm B Height (side) 640 mm C Length (body) 2105 mm D Length (over all) 3055 mm E Width (inside) 1135 mm F Width (over all) 1575 mm G Ground Clearance 460 mm I Length (nose-cone) 650 mm Technical Info Tare Mass 280 kg GVM 750 kg Pay Load 470 kg Axle Length 1400 mm Axle Capacity 1250 kg Leaf Springs 8 Blade 36 inch Wheels 195 x 14 inch Doors Door (rear - height) 500 mm Door (rear - width) 620 mm (J) -
For vendors who need to sell products at remote public places, this trailer provides many practical and essential features. The trailer interior can be equipped and fitted out, to suit many types of trading activity that the entrepreneur wishes to do. Features Roof height allows for full-height standing room. Floor space sufficient to accommodate fridge and/or freezer Floor is manufactured from quality corrosion resistant sheet steel Body made from corrosion resistant steel Secure lockable serving hatch Stainless steel hatch with top half an awning and bottom a counter top Stainless steel splash-back complete wall-panel behind cooking area 4x spring-loaded roof hatches for increased ventilation Internal overhead light is provided for illuminating the counter and interior Storage tray-shelves provided in nosecone Two sliding windows on top right side of trailer for increased ventilation Burglarproofing on windows provide essential security Two adjustable support legs on trailer rear corners for stabilizing on uneven ground Retractable and lockable access step for easy entry through rear door Pad-lockable rear access door New adjustable polypropylene and PVC jockey wheel Multi-function LED lights One spare wheel Pad-lockable spare wheel bracket mounted on right side mudguard Two pad-lockable general-purpose enclosures mounted ahead of the mudguards Coupler ‘Sigma Auto-reverse type’ Run-in brakes Caravan plug outlet for power supply on right back side of trailer 14 inch 5 stud wheels Floor covered with nonslip surface for easy cleaning Pad-lockable nosecone compartment which is well-ventilated Nosecone compartment equipped with bracket with ratchet straps to secure 2x19kg gas bottles The trailer has a design registration No. F2004/0491, since 15 April 2004. Copyright also applies in respect of the trailer.Dimensions A Height (over all) 2570 mm B Height (side) 2080 mm C Length (body) 2660 mm D Length (over all) 3690 mm E Width (inside) 1525 mm F Width (over all) 2025 mm G Ground Clearance 250 mm Technical Info Tare Mass 800 kg GVM 1400 kg Pay Load 600 kg Brakes Run-in Axle Length 1830 mm Axle Capacity 1800 kg Leaf Springs 10 Blade Wheels 185 x 14 inch Doors Door (rear - height) 1765 mm Door (rear - width) 860 mm Serving Hatch (height) 745 mm Serving Hatch (width) 1865 mm -
Features Front nose sports a new streamlined shape reducing wind resistance Improved ramp, fitted with double gaslifts and push-down foot pedal, for easier opening Interior light fitting Jerry can holder Large lockable rear door fitted above ramp, opening 270 deg Robust chassis, A-Frame and floor plates Three large windows, middle one protected by a sheet steel screen, two outside windows are fitted with open/close sliding facility Two air vents fitted on the roof of the trailer Lockable, easily accessible spare wheel holder, fitted on top of modern improved mudguards Double jockey wheel 200mm dia Heavy duty rubber floor mats All doors and ramp have padlockable facilities Alko-Trailco coupler and axles Partition between horses of modern designed perforated steel screen, allowing horses to see each other and gain confidence Left and right insides of padded vinyl covered panels, fitted with fold-away beds Adjustable padded breast bars and rear padded panels to ensure safety of horses in transit Front storage compartment for fodder, grooming bags etc Body constructed from corrosion resistant rigidised zinc galvanised or Electro-galvanised steel, prime coated and quality white final paint is applied Convenient front door for groom Including spare wheel 195x14 inch The trailer has a design registration No. F2004/0491, since 15 April 2004. Copyright also applies in respect of the trailer.
Dimensions A Height (over all) 2730 mm B Height (side) 2280 mm C Length (body) 3370 mm D Length (over all) 4695 mm E Width (inside) 1620 mm F Width (over all) 2250 mm G Ground Clearance 310 mm Technical Info Tare Mass 1180 kg GVM 2800 kg Pay Load 1620 kg Brakes Run-in brakes Axle Length 2060 mm Axle Capacity 1800 kg x 2 Leaf Springs Rubber suspension Wheels 195 x 14 inch Doors Ramp (rear - height) 1450 mm Ramp (rear - width) 1690 mm Door (front - height) 1900 mm Door (front - width) 675 mm Door (side - height) 1900 mm -
This sporty transporter has: 1. Perfectly balanced, yet light weight and durable. 2. Lugs on sides to secure bikes in transit. 3. Bikes can be loaded from the rear ,ramp supplied) 4. Solid floor. 5. Fitted with a lockable coupler.(lock optional) 6. Equipped with a handbrake chain. 7. Tailights are protected. 8. Including spare wheel 165x13 inchcs
Dimensions A Height (over all) 680 mm B Height (side) 210 mm C Length (body) 2300 mm D Length (over all) 3600 mm E Width (inside) 1500 mm F Width (over all) 2040 mm G Ground Clearance 220 mm Technical Info Tare Mass 300 kg GVM 1400 kg Pay Load 1000 kg Brakes Run-in Axle Length 1860 mm Axle Capacity 700kg x 2 Leaf Springs Rubber axle Wheels 165 x 13 inch -
This snappy mover has: 1. Perfectly balanced, yet light weight and durable. 2. Lugs on sides to secure bikes in transit. 3. Bikes can be loaded from the rear ,ramp supplied) 4. Solid floor. 5. Fitted with a lockable coupler.(lock optional) 6. Equipped with a handbrake chain. 7. Tailights are protected. 8. Including spare wheel 165x13 inchecs
Dimensions A Height (over all) 720 mm B Height (side) 400 mm C Length (body) 2640 mm D Length (over all) 3640 mm E Width (inside) 1310 mm F Width (over all) 1730 mm G Ground Clearance 220 mm Technical Info Tare Mass 320 kg GVM 750 kg Pay Load 430 kg Brakes No brakes Axle Length 1480 mm Axle Capacity 1100 kg Leaf Springs 8 Blade Wheels 165 x 13 inch -
Traveller Sputnik 3/4 ton unbraked (Special) This specialised promotional trailer is available for marketing purposes. It has a generous storage and carrying capacity. Provision is made for transporting physical samples as well as sales material. The interior floor and lower area of the sides has been rubberised for durability. Additional robust shelf-trays are mounted on the interior right side, as well as in the nosecone. A promotional leaflet rack is mounted on the inside of the rear door. The trailer has an externally mounted spare wheel bracket with spare wheel freeing up internal space. A pad-lockable gas bottle holder is externally mounted on the right mudguard, and is suitable for a 5kg gas bottle. The large surface areas presented by the external faces of the trailer provide an ideal space for vehicle graphics. A roof-mounted 'Ostrich Wing' awning can be fitted, providing much needed shade in the African sun. Features • Designed for transportation of bulky goods requiring protection from the elements • Body and roof constructed from 0.9mm corrosion resistant electro-galvanised sheet steel • Doors are lockable and can be found at the side and the back of the trailer for easy loading • Sides are strengthened by formed hat-sections which prevents drumming and vibration • New Adjustable jockey wheel • LED multi-function lights • Two adjustable support legs on rear of trailer for leveling on uneven ground • Spare wheel bracket • Including spare wheel 165x13 inch • Floor and lower sides (300mm high) rubberised for durability • Interior shelving tray storage on right side and in nosecone • Printed material storage rack on inside of back door • Pad-lockable 5kg gas bottle holder • Roof-mounted 'Ostrich Wing' awningDownload Graphic Area Sizes here: Traveller 3 quarter Graphic area sizes
Dimensions A Height (over all) 1840 mm B Height (side) 1340 mm C Length (body) 2690 mm D Length (over all) 3660 mm E Width (inside) 1525 mm F Width (over all) 2010 mm G Ground Clearance 235 mm Technical Info Tare Mass 380 kg GVM 750 kg Pay Load 370 kg Brakes No Brakes Axle Length 1830 mm Axle Capacity 1250 kg Leaf Springs 10 blade Wheels 165 x 13 inch Doors Door (rear - height) 1010 mm Door (rear - width) 1070 mm Door (side - height) 1010 mm Door (side - width) 550 mm -
Venter Traveller 8 Sputnik for sale from Helderberg Trailer Sales - suppliers of trailers and spares.Designed for transportation of luggage, bulky goods, equipment, parcels etc. Body and roof constructed from 0.9mm corrosion resistant electro-galvanised sheet steel. Doors have heavy-duty robust hinges for longevity Pad-lockable spare wheel holder mounted on left mudguard Adjustable jockey wheel 8 inch Multi-function LED lights 7 x tie-down rings on floor Adjustable rigid support legs for uneven ground Back and side door doors are pad-lockable. Sides are strengthened by formed hat-sections which prevents drumming and vibration. Including spare wheel 195x14 inch Heavy-duty coupler with brake 
Dimensions A Height (over all) 2200 mm B Height (side) 1650 mm C Length (body) 2960 mm D Length (over all) 3860 mm E Width (inside) 1525 mm F Width (over all) 2050 mm G Ground Clearance 260 mm Technical Info Tare Mass 560 kg GVM 1525 kg Pay Load 965 kg Brakes Run - in Axle Length 1830 mm Axle Capacity 1800 kg Leaf Springs 10 Blade Wheels 195 x 14 inch Doors Door (rear - height) 1330 mm Door (rear - width) 1050 mm Door (side - height) 1280 mm Door (side - width) 650 mm -
Venter Traveller 7 Sputnik for sale from Helderberg Trailer Sales - suppliers of trailers and spares. Features: Designed for transportation of luggage, bulky goods, plants, sport equipment, parcels etc. Body and roof constructed from 0.9mm corrosion resistant electro-galvanised or zinc galvanised sheet steel. Sides are strengthened by formed hat-sections which prevents drumming and vibration. Doors have heavy-duty robust hinges for longevity Pad-lockable spare wheel holder mounted on left mudguard Galvanised coupler Adjustable jockey wheel 8 inch, fitted with two bearings for longevity Multi-function LED lights Adjustable rigid support legs for uneven ground Back and side door doors are pad-lockable. Flush floor-mounted ring holders Durable corrosion-proof dust caps Numberplate holder and light fitting Including spare wheel 165x13 inch Primer coat and white coat of paint 
Dimensions A Height (over all) 1820 mm B Height (side) 1350 mm C Length (body) 2690 mm D Length (over all) 3285 mm E Width (inside) 1200 mm F Width (over all) 1660 mm G Ground Clearance 215 mm Technical Info Tare Mass 340 kg GVM 750 kg Pay Load 410 kg Brakes No Brakes Axle Length 1480 mm Axle Capacity 1250 kg Leaf Springs 8 blade Wheels 165 x 13 inch Doors Door (rear - height) 1010 mm Door (rear - width) 845 mm Door (side - height) 1010 mm Door (side - width) 550 mm -
Venter Traveller 7 SLK for sale from Helderberg Trailer Sales - suppliers of trailers and spares.Features: Designed for transportation of luggage, bulky goods, plants, sport equipment, parcels etc. Body and roof constructed from 0.9mm corrosion resistant electro-galvanised sheet steel. Pad-lockable doors have heavy-duty robust hinges for longevity Pad-lockable spare wheel holder mounted on left mudguard Adjustable jockey wheel 6 inch Adjustable rigid support legs for uneven ground 7 x tie-down rings Sides are strengthened by formed hat-sections which prevents drumming and vibration. New aerodynamic round nose creating additional storage space. Including spare wheel 165x13 inch The trailer has a design registration No. F2004/0491, since 15 April 2004. Copyright also applies in respect of the trailer. 
Dimensions A Height (over all) 1820 mm B Height (side) 1350 mm C Length (body) 2690 mm D Length (over all) 3235 mm E Width (inside) 1200 mm F Width (over all) 1660 mm G Ground Clearance 215 mm Technical Info Tare Mass 340 kg GVM 750 kg Pay Load 410 kg Brakes No brakes Axle Length 1480 mm Axle Capacity 1250 kg Leaf Springs 8 blade Wheels 165 x 13 inch Doors Door (rear - height) 1010 mm Door (rear - width) 845 mm Door (side - height) 1010 mm Door (side - width) 550 mm -
Venter Traveller 3/4 ton Sputnik (unbraked) for sale from Helderberg Trailer Sales - suppliers of trailers and spares. Features Designed for transportation of luggage, bulky goods, plants, sport equipment, parcels etc. Body and roof constructed from 0.9mm corrosion resistant electro-galvanised or zinc galvanised sheet steel. Sides are strengthened by formed hat-sections which prevents drumming and vibration. Doors have heavy-duty robust hinges for longevity Pad-lockable spare wheel holder mounted on left mudguard Galvanised coupler Adjustable jockey wheel 8 inch, fitted with two bearings for longevity Multi-function LED lights Adjustable rigid support legs for uneven ground Back and side door doors are pad-lockable. Flush floor-mounted ring holders Durable corrosion-proof dust caps Numberplate holder and light fitting Including spare wheel 165x13 inch Primer coat and white coat of paint 
Dimensions A Height (over all) 1840 mm B Height (side) 1340 mm C Length (body) 2690 mm D Length (over all) 3660 mm E Width (inside) 1525 mm F Width (over all) 2010 mm G Ground Clearance 235 mm Technical Info Tare Mass 380 kg GVM 750 kg Pay Load 370 kg Brakes No Brakes Axle Length 1830 mm Axle Capacity 1250 kg Leaf Springs 10 Blade Wheels 165 x 13 inch Doors Door (rear - height) 1010 mm Door (rear - width) 1070 mm Door (side - height) 1010 mm Door (side - width) 550 mm -
Venter Traveller 3/4 ton Sputnik (braked) for sale from Helderberg Trailer Sales - suppliers of trailers and spares.Features: Designed for transportation of luggage, bulky goods, plants, sport equipment, parcels etc. Body and roof constructed from 0.9mm corrosion resistant electro-galvanised or zinc galvanised sheet steel. Sides are strengthened by formed hat-sections which prevents drumming and vibration. Doors have heavy-duty robust hinges for longevity Pad-lockable spare wheel holder mounted on left mudguard Galvanised heavy-duty coupler Adjustable jockey wheel 8 inch, fitted with two bearings for longevity Multi-function LED lights Adjustable rigid support legs for uneven ground Back and side door doors are pad-lockable. Flush floor-mounted ring holders Durable corrosion-proof dust caps Numberplate holder and light fitting Including spare wheel 165x13 inch Primer coat and white coat of paint 
Dimensions A Height (over all) 1840 mm B Height (side) 1340 mm C Length (body) 2690 mm D Length (over all) 3660 mm E Width (inside) 1525 mm F Width (over all) 2010 mm G Ground Clearance 235 mm Technical Info Tare Mass 400 kg GVM 1150 kg Pay Load 750 kg Brakes Run-in brakes Axle Length 1830 mm Axle Capacity 1250 kg Leaf Springs 10 blade Wheels 195 x 14 inch Doors Door (rear - height) 1010 mm Door (rear - width) 1070 mm Door (side - height) 1010 mm Door (side - width) 550 mm -
Venter Traveller 3/4 ton SLK Braked Features • Superb for transportion of bulky heavy weight goods. • A well balanced, multi purpose, heavy duty trailer, durable yet light for towing. • Body constructed from 1.6mm corrosion resistant electro galvanized sheet steel. • Floor constructed from 1.6 mm corrosion resistant electro galvanized sheet steel. • Doors are pad-lockable and can be found at the left side and the back of the trailer for easy loading. • Adjustable heavy-duty support legs • Pad-lockable spare wheel holder • New aerodynamic round nose creating additional storage space. • Adjustable 8 inch jockey wheel • Heavy duty galvanised coupler • 7 x Floor-mounted tie-down lugs • Including spare wheel 195x14 inch • Multi-function LED lights • The trailer has a design registration No. F2004/0491, since 15 April 2004. Copyright also applies in respect of the trailer.Dimensions A Height (over all) 1840 mm B Height (side) 1340 mm C Length (body) 2690 mm D Length (over all) 3660 mm E Width (inside) 1525 mm F Width (over all) 2010 mm G Ground Clearance 235 mm Technical Info Tare Mass 400 kg GVM 1150 kg Pay Load 750 kg Brakes Run-in Axle Length 1830 mm Axle Capacity 1250 kg Leaf Springs 10 Blade 36 inch Wheels 195 x 14 inch Doors Door (rear - height) 1010 mm Door (rear - width) 1070 mm Door (side - height) 1010 mm Door (side - width) 550 mm -
Venter Traveller 3/4 ton SLK 14 inch (unbraked) for sale from Helderberg Trailer Sales - suppliers of trailers and spares.Features Designed for transportation of luggage, bulky goods, plants, sport equipment, parcels etc. Body and roof constructed from 0.9mm corrosion resistant electro-galvanised sheet steel. Doors are pad-lockable and can be found at the side and the back of the trailer for easy loading. Sides are strengthened by formed hat-sections which prevents drumming and vibration. Doors have heavy-duty robust hinges for longevity Pad-lockable spare wheel holder mounted on left mudguard Adjustable jockey wheel 8 inch Multi-function LED lights Adjustable rigid support legs for uneven ground 7 x tie-down rings Five stud hub and axle allowing a 14 inch wheel to be fitted Aerodynamic round nose cone reduces wind resistance and provides packing extra space. Including spare wheel 195x14 inch The trailer has a design registration No. F2004/0491, since 15 April 2004. Copyright also applies in respect of the trailer. 
Dimensions A Height (over all) 1840 mm B Height (side) 1340 mm C Length (body) 2690 mm D Length (over all) 3660 mm E Width (inside) 1525 mm F Width (over all) 2010 mm G Ground Clearance 235 mm Technical Info Tare Mass 400 kg GVM 750 kg Pay Load 350 kg Brakes No Brakes Axle Length 1830 mm Axle Capacity 1250 kg Leaf Springs 10 blade 36 inch Wheels 195 x 14 inch Doors Door (rear - height) 1010 mm Door (rear - width) 1070 mm Door (side - height) 1010 mm Door (side - width) 550 mm -
Venter Traveller 3/4 ton SLK (unbraked) for sale from Helderberg Trailer Sales - suppliers of trailers and spares.Features: 1. Designed for transportation of luggage, bulky goods, plants, sport equipment, parcels etc. 2. Body and roof constructed from 0.9mm corrosion resistant electro-galvanised sheet steel. 3. Doors are lockable and can be found at the side and the back of the trailer for easy loading. 4. Sides are strengthened by formed hat-sections which prevents drumming and vibration. 5. Aerodynamic round nose cone reduces wind resistance and provides packing space. 6. Including spare wheel 165x13 inch 7. The trailer has a design registration No. F2004/0491, since 15 April 2004. Copyright also applies in respect of the trailer. 
Dimensions A Height (over all) 1840 mm B Height (side) 1340 mm C Length (body) 2690 mm D Length (over all) 3660 mm E Width (inside) 1525 mm F Width (over all) 2010 mm G Ground Clearance 235 mm Technical Info Tare Mass 400 kg GVM 750 kg Pay Load 350 kg Brakes No Brakes Axle Length 1830 mm Axle Capacity 1250 kg Leaf Springs 10 Blade Wheels 165 x 13 inch Doors Door (rear - height) 1010 mm Door (rear - width) 1070 mm Door (side - height) 1010 mm Door (side - width) 550 mm -
Venter Traveller 10 Sputnik Tandem (braked) for sale from Helderberg Trailer Sales - suppliers of trailers and spares.Features: Designed for transportation of luggage, bulky goods, plants, sport equipment, parcels etc. Body and roof constructed from 0.9mm corrosion resistant electro-galvanised sheet steel. Doors are pad-lockable and can be found at the left side and the back of the trailer for easy loading. All doors are pad-lockable and equipped with new heavy-duty hinges for robust usage Sides are strengthened by formed hat-sections which prevents drumming and vibration. Two adjustable extending supporting back legs to provide levelling and stability when parked on uneven ground 7x ring holders to tighten luggage Multi-function LED lights Heavy-duty coupler Spare Wheel holder which is pad-lockable Fitted with run-in brakes for maximum safety Fitted with 2 Rubax axles. Adjustable durable jockey wheel 8 inch Including spare wheel 165x13 inch 
Dimensions A Height (over all) 2060 mm B Height (side) 1660 mm C Length (body) 3610 mm D Length (over all) 4540 mm E Width (inside) 1525 mm F Width (over all) 2045 mm G Ground Clearance 280 mm Technical Info Tare Mass 740 kg GVM 1740 kg Pay Load 1000 kg Brakes Run - in Axle Length 1890 mm Axle Capacity 1500 kg X 2 Leaf Springs Rubax Axle Wheels 165 x 13 inch Doors Door (rear - height) 1330 mm Door (rear - width) 1050 mm Door (side - height) 1280 mm Door (side - width) 730 mm -
Features: • Body and roof constructed from 0.9mm corrosion resistant electro-galvanised sheet steel. • Doors are pad-lockable and can be found at the left side and the back of the trailer for easy loading. • All doors equipped with new heavy-duty hinges for robust usage • Sides are strengthened by formed hat-sections which prevents drumming and vibration. • Two extending supporting back legs to provide levelling and stability when parked on uneven ground • 5 x sprung floor-recessed heavy-duty ring holders to tighten luggage • Multi-function LED lights • Heavy-duty coupler • Spare Wheel holder which is pad-lockable • Fitted with run-in brakes for maximum safety • Adjustable durable jockey wheel 8 inch • Including spare wheel 195x14 inch
Dimensions A Height (over all) 2220 mm B Height (side) 1660 mm C Length (body) 3610 mm D Length (over all) 4540 mm E Width (inside) 1525 mm F Width (over all) 2045 mm G Ground Clearance 265 mm Technical Info Tare Mass 600 kg GVM 1525 kg Pay Load 925 kg Brakes Run - in Axle Length 1830 mm Axle Capacity 1800 kg Leaf Springs 12 Blade Wheels 195 x 14 inch 6 stud Doors Door (rear - height) 1330 mm Door (rear - width) 1050 mm Door (side - height) 1280 mm Door (side - width) 730 mm -
Venter Traveller 10 SLK Tandem (braked)Features Body and roof constructed from 0.9mm corrosion resistant electro-galvanised sheet steel. Doors are pad-lockable and can be found at the left side and the back of the trailer for easy loading. All doors are pad-lockable and equipped with new heavy-duty hinges for robust usage Heavy-duty hinges on all doors Sides are strengthened by formed hat-sections which prevents drumming and vibration. Two adjustable extending supporting back legs to provide levelling and stability when parked on uneven ground 9 x ring holders to tighten goods Multi-function LED lights Heavy-duty coupler Spare Wheel holder which is pad-lockable Fitted with run-in brakes for maximum safety Fitted with 2 Rubax axles. Adjustable durable jockey wheel 8 inch Including spare wheel 165x13 inch 
Dimensions A Height (over all) 2060 mm B Height (side) 1660 mm C Length (body) 3610 mm D Length (over all) 4480 mm E Width (inside) 1525 mm F Width (over all) 2080 mm G Ground Clearance 280 mm Technical Info Tare Mass 740 kg GVM 1740 kg Pay Load 1000 kg Brakes Run-in Axle Length 1890 mm Axle Capacity 1500 kg x 2 Leaf Springs Rubax axle Wheels 165 x 13 inch Doors Door (rear - height) 1330 mm Door (rear - width) 1050 mm Door (side - height) 1280 mm Door (side - width) 730 mm -
Features: • Perfectly balanced, yet light weight and robust • Two adjustable support legs • Recessed sprung tie-down rings on sides and front to secure bikes in transit • Bikes loaded from the rear ,with a robust ramp • Three front-wheel brackets to support bikes as standard fittings • Ramp stores away on trailer floor with threaded knobs • Solid floor with perforated tread holes • Fitted with a lockable coupler(lock optional) • Equipped with a handbrake chain • LED tailights are protected • Spare wheel mounted underneath trailer, at rear • Spare wheel size - 165x13 inch • Includes a pad-lockable nosecone • Aluminium handle on nosecone lid
Dimensions A Height (over all) 1110 mm C Length (body) 2320 mm D Length (over all) 3560 mm F Width (over all) 1980 mm Technical Info Tare Mass 240 kg GVM 750 kg Pay Load 510 kg Brakes No brakes Axle Length 1830 mm Axle Capacity 1250 kg Leaf Springs 10 Blade Wheels 165 x 13 inch -
Super 7 with steel roof rack With cars scaling down in size for economy and versatility, it is becoming more and more apparent to holiday goers or anyone just wanting to transport items, that an alternative source of space needs to be found. Well, it already has been, in the form of Venter Luggage trailers. What would you expect from a trailer that has been part of the South African travel landscape for so long? Well, to be such a survivor you'd probably imagine that the trailer would be high quality, have tasteful, constant design and be as versatile as you need it to be. Well, with a Venter trailer you certainly wouldn't be wrong. This trailer is a veritable workhorse that can be utilized for multiple purposes. The unique design and robustness and its high standards of quality and reliability have been developed and perfected over a period of many years. And boy, does it show. Constructed from quality corrosion resistant, electro and zinc galvanised sheet steel, the rigid body is both safe and well balanced, maintaining perfect alignment behind the towing vehicle. What's more, only top class, proven materials and parts are used. And with dealerships nationwide, quality service and authentic spares are guaranteed. It's this kind of reliability and quality that has ensured very high resale values. Features • One spare wheel 155 x 13” • Nosecone with new toggle catch • Steel roof rack • 8 tie-down ring holders to tighten luggage • Number plate twin light fitting • Alko coupler with plug holder • Long life special axle with larger bearings • 6 blade leaf spring • Two gas lifts on trailer lid • New toggle catches on lid • Aluminium handle on lid • Bumpstops on axleDimensions A Height (over all) 1245 mm B Height (side) 780 mm C Length (body) 2125 mm D Length (over all) 3175 mm E Width (inside) 1180 mm F Width (over all) 1550 mm G Ground Clearance 250 mm I Length (nose-cone) 650 mm Technical Info Tare Mass 207 kg GVM 700 kg Pay Load 493 kg Brakes None Axle Length 1400 mm Axle Capacity 700 kg Leaf Springs 6 Blade Wheels 155 x 13 inch -
Super 7 with extension frame With cars scaling down in size for economy and versatility, it is becoming more and more apparent to holiday goers or anyone just wanting to transport items, that an alternative source of space needs to be found. Well, it already has been, in the form of Venter Luggage trailers. What would you expect from a trailer that has been part of the South African travel landscape for so long? Well, to be such a survivor you'd probably imagine that the trailer would be high quality, have tasteful, constant design and be as versatile as you need it to be. Well, with a Venter trailer you certainly wouldn't be wrong. This trailer is a veritable workhorse that can be utilized for multiple purposes. The unique design and robustness and its high standards of quality and reliability have been developed and perfected over a period of many years. And boy, does it show. Constructed from quality corrosion resistant, electro and zinc galvanised sheet steel, the rigid body is both safe and well balanced, maintaining perfect alignment behind the towing vehicle. What's more, only top class, proven materials and parts are used. And with dealerships nationwide, quality service and authentic spares are guaranteed. It's this kind of reliability and quality that has ensured very high resale values. Features • One spare wheel 155 x 13” • Nosecone with new toggle catch • Extension frame for 7ft luggage trailer • 8 tie-down ring holders to tighten luggage • Number plate twin light fitting • Alko coupler with plug holder • Long life special axle with larger bearings • 6 blade leaf spring • Two gas lifts on trailer lid • New toggle catches on lid • Aluminium handle on lid • Bumpstops on axleDimensions A Height (over all) 1085 mm B Height (side) 880 mm C Length (body) 2125 mm D Length (over all) 3175 mm E Width (inside) 1180 mm F Width (over all) 1550 mm G Ground Clearance 250 mm I Length (nose-cone) 650 mm Technical Info Tare Mass 209 kg GVM 700 kg Pay Load 491 kg Brakes None Axle Length 1400 mm Axle Capacity 700 kg Leaf Springs 6 Blade Wheels 155 x 13 inch -
Super 7 with cycle rack With cars scaling down in size for economy and versatility, it is becoming more and more apparent to holiday goers or anyone just wanting to transport items, that an alternative source of space needs to be found. Well, it already has been, in the form of Venter Luggage trailers. What would you expect from a trailer that has been part of the South African travel landscape for so long? Well, to be such a survivor you'd probably imagine that the trailer would be high quality, have tasteful, constant design and be as versatile as you need it to be. Well, with a Venter trailer you certainly wouldn't be wrong. This trailer is a veritable workhorse that can be utilized for multiple purposes. The unique design and robustness and its high standards of quality and reliability have been developed and perfected over a period of many years. And boy, does it show. Constructed from quality corrosion resistant, electro and zinc galvanised sheet steel, the rigid body is both safe and well balanced, maintaining perfect alignment behind the towing vehicle. What's more, only top class, proven materials and parts are used. And with dealerships nationwide, quality service and authentic spares are guaranteed. It's this kind of reliability and quality that has ensured very high resale values. Features • One spare wheel 155 x 13” • Nosecone with new toggle catch • Cycle rack for four bicycles • 8 tie-down ring holders to tighten luggage • Number plate twin light fitting • Alko coupler with plug holder • Long life special axle with larger bearings • 6 blade leaf spring • Two gas lifts on trailer lid • New toggle catches on lid • Aluminium handle on lid • Bumpstops on axleDimensions A Height (over all) 1210 mm B Height (side) 560 mm C Length (body) 2125 mm D Length (over all) 3175 mm E Width (inside) 1180 mm F Width (over all) 1550 mm G Ground Clearance 250 mm I Length (nose-cone) 650 mm Technical Info Tare Mass 207 kg GVM 700 kg Pay Load 493 kg Brakes None Axle Length 1400 mm Axle Capacity 700 kg Leaf Springs 6 Blade Wheels 155 x 13 inch